Windows 10 has received a new update that includes some exciting new features and aesthetics, but it also includes several unforeseen faults that should have been avoided. The unexpected store exception issue is one of the most common errors, and it causes you to restart your computer.
Since Windows 10 was updated, this unexpected store exception problem has been incredibly annoying. The blue screen of death is accompanied by this error. The majority of these issues are caused by antivirus software installed on PCs.
We’ll talk about how to uninstall antivirus software to stop this Bsod from bothering us in this article. The bug information clearly indicates that this problem is caused by antivirus software. The traces created by the operating system are shown in detail in the book’s section.
How To Fix Windows 10’s Unexpected Store Exceotion Error
If you can locate the drives that antivirus protection programmes use in that part, you can quickly locate the mistakes.
Even if you don’t want to deactivate your antivirus software, this article provides you with other methods for removing this problem from your computer. So, let’s look at several ways for resolving the unexpected store exception error in Windows 10.
1. Remove the Antivirus Software
Microsoft Defender is a built-in antivirus programme in Windows 10, and it is one of the best. As a result, deleting any antivirus product will have no effect on your PC’s protection. McAfee has been named as the perpetrator.
To uninstall the antivirus programme, follow the procedures below:
Step 1: To open the pop-up menu, press the “Windows key + X” combination.
Step 2: From the drop-down menu, select ” Control Panel.”
Step 3: On the control panel, look for the “programmes” area and choose it.
Step 4: This list will show you all of the programmes that are installed on your computer. Select the antivirus programme and all of its versions, then right-click and select the uninstall option from the drop-down menu.
Step 5: A popup window will appear asking if you really want to uninstall the programme; select yes.
To complete the uninstallation, follow these procedures. After that, restart your computer. If you follow the procedures above, you will encounter fewer errors. If the problems persist, we have two more options to consider, which we will explore later in this post.
2. Perform a Hard Disc Health Check
After discovering faults in the Hard Disk Health, some users have experienced this error. Their computers had vital files in a faulty sector of the hard disc, resulting in the mistake.
A failing drive was also discovered to be the source of the problem by several users. If the following approach does not resolve your PC error, you should check the hard drive’s health to resolve the problem.
To remedy the problem, we’ll need to employ a third-party hard disc health diagnostic tool. Follow the instructions –
Step 1: We’ll use the Crystal Disk Info programme to assess the hard disk’s health.
Step 2: This programme is executable; to install it, follow the on-screen instructions.
When you run the software after it has been installed, the primary window will display the Hard Disk Health state. If the Hard Drive Health is normal, the report will say “Good,” but if it says “Bad,”
It means there is a problem with your hard disc, and it is recommended that you replace it. If, however, the problem persists despite the app’s excellent status, we have another solution to provide.
3. Check for Driver Issues
This strategy works well with Lenovo PCs. If the error happens repeatedly, you should take the following measures to resolve the problem:
Step 1: Turn off the automatic driver installation. To find the start menu, type “gpedit.msc” into the search box. If you haven’t already done so, you should install the global policy editor by following the steps below:
Step 2: On the left side of the window, expand “Computer Configuration.”
Step 3: Select “Administrative Template” from the drop-down menu, then “System” and “Device Installation.”
Step 4: On the right side of the window, double-click “Prevent installation of devices not described by other policy settings.”
Step 5: Finally, select “enable” and then “Ok.”
Step 6: Turn on the computer again.
Step 7: Select “Device Manager” from the start menu by pressing “Windows key+ X.”
Step 8: In the Device Manager window, go to “Sound video and game controllers,” then select “Conexant Smart Audio” or “IDT High definition Audio,” uninstall from the list, and check if “Delete the driver software for the device” is checked in the checkbox.
Step 9: Then press “Windows key+ X” and select “Programs and Features” from the drop-down menu to delete all Dolby and IDT-related software.
Step 10: Restart your computer.
You must download and install the Dolby driver after rebooting. After reinstalling the most recent driver, you won’t get any issues.
4. Turning off Fast Start-up
The rapid start-up feature in Windows 10 works. In the same way that earlier versions of sleep modes worked. It combines the advantages of cold shutdown with hibernation. All background apps on a computer are closed when the window is closed.
The kernel loads up while the system session is underway. Device drivers are notified in order to prepare for hibernation, which involves saving the current state to hibernation and turning off the machine.
When you restart your computer using this method, you won’t have to reload the kernel system state or the drivers. The loaded image is refreshed from your am’s hibernation file, sending you to the start-up screen.
This strategy saves a significant amount of time. The disadvantage is that it does not correctly load the essential drivers every time you resume. The drivers will not open since they have not been reloaded by rebooting. This could cause issues when you’re operating.
Step 1: To open the Run application, press Windows+R. Then, in the dialogue box, press the control panel and enter. A computer control panel will be launched as a result of this.
Step 2: Select power options from the control panel.
Step 3: Select “Choose what the power buttons do” from the power choices menu. On the left side of the screen, you’ll find this choice.
Step 4: Click on the “Change settings that are presently unavailable” option, which requires administrative access.
Step 5: Uncheck the box labelled “Turn on rapid start-up” at the bottom of the screen. Exit after saving the changes.
Step 6: Restart the computer to see if the problem has been resolved.
5. Update Display Drivers
We’ll use this procedure to restart your computer in safe mode and remove the display card’s install drivers. After restarting the disc problem, display drivers would be automatically installed after the display hardware was detected.
Step 1: To start your computer in safe mode, follow the procedures outlined in this article.
Step 2: After entering safe mode, Select device manager from the drop-down menu by right-clicking on the Windows key. Another approach to open the device manager is to hit windows plus hour, which will open the run application, and then type “devmgmt.msc” into it.
Step 3: Expand the display adapter area in the device manager, then right-click on the display hardware. Then select Uninstall Device from the drop-down menu. A pop-up will appear confirming your activities; click OK to continue.
Step 4: Turn on your computer again. In the search bar, press windows plus to bring up your start menu. In the dialogue box, type Windows Update and select the first search result.
Step 5: In the update settings, select the updates “check for updates” option. If updates are available, they will be installed automatically. It’s possible that you’ll have to restart your computer.
Step 6: Check to see if the problem has been resolved after the update.
Fee drivers are updated on a regular basis to ensure the optimal performance for hardware devices. You can also install your previous driver fire hardware if the latest driver does not resolve the issues caused by the errors.
You can install the driver manually from the manufacturer’s list. Follow the procedures below to manually install the drivers.
Step 1: Follow the steps in the above method to open the device manager, then right-click on the driver and unselect update driver from the drop-down list.
Step 2: A pop-up window will open, asking if you want to update the drivers manually or automatically. Select “browse my computer for driver software” from the drop-down menu.
Step 3: You can browse the folders in the downloaded drivers. You can choose the appropriate drivers under Windows, which will install them, and then restart your computer to see if the problem or error is the consequence.
You should also use the device manager to verify the devices connected to your PC and update the drivers one by one. Other gadgets connected to your PC can sometimes cause this issue.
6. Using System File Checker
System file checker is a Microsoft Windows function that allows users to examine their computers for damaged files. Since Windows 98, this has been a standard feature in Microsoft Windows. This assists in determining whether the error is caused by corrupted files in Windows.
Step 1: Press windows+R to open the run application. Type “taskmgr” into the dialogue box and hit enter. This will open the task manager on your PC.
Step 2: Select “Run the new task” from the drop-down list under File choices in the top left corner of the screen.
Step 3: In the dialogue box, type “Powershell” and select “create this task with administrative capabilities.”
Step 4: In Windows Powershell, type “sfc/scannow” and then press the enter key. Due to the computer’s scanning, this may take longer.
Step 5: In the Powershell, type “DISM/ Online/Clean-up/ RestoreHealth” if you receive an error message stating that Windows has detected a fault but is unable to resolve it. This procedure may take longer depending on your internet connection.
Check to see if your computer has begun working properly after restarting it. If that’s the case, this procedure will correct the problem.
7. Disable Sleep Mode
The majority of the issues were resolved by disabling sleep mode. This problem could be caused by the machine sleeping or by the first startup storing of the specified data. We can turn off the sleep mode entirely and then see if the problems and errors have gone away. You can undo the changes if they don’t work.
Step 1: To begin, right-click on the battery symbol in the lower right corner of your screen and select “power options.”
Step 2: If this option is not available on your computer, hit Windows + S and then type “select a power plan.” Select the more appropriate option.
Step 3: On the screen, select the “Put the computer to sleep” option. In both the battery and plugged-in modes, set the choice to “Never.” Exit by clicking “Save changes.”
Step 4: Restart your computer to see if the problem has been resolved.
8. Reconnecting Your Hard Drive
One way is to reconnect your hard disc and see if the error has been resolved. If the issue is with the hard disc, this procedure will solve the problem.
Turn off your computer, unplug the power, then carefully remove the lead and detach the black and white cables from your hard drive that go to the motherboard. Allow for some time to pass before plugging them back in. Then restart your computer to see if the problem has been repaired.
If the problem persists after reinstalling Windows, you should check your hard disc. There’s a potential that the issue is with your hard drive, and that the error will recur even if you install a fresh copy of Windows on your computer.
Conclusion
All of these methods will assist you in resolving the unanticipated store exception error in Windows 10. There are eight solutions to this error in this article. Surely, one of these options will solve your issue.
